- Iron Sharpening Finish - delsur777, 2009-06-07, 01:02
![Open whole thread [*]](templates/default/images/complete_thread.png)
- Iron Sharpening Finish - billd, 2009-06-07, 09:53
- Iron Sharpening Finish - delsur777, 2009-06-07, 12:07
- Iron Sharpening Finish - griph0n, 2009-06-07, 12:26
- Iron Sharpening Finish - delsur777, 2009-06-07, 16:24
- Iron Sharpening Finish - billd, 2009-06-08, 07:52
- Iron Sharpening Finish - delsur777, 2009-06-08, 10:52
- Iron Sharpening Finish - billd, 2009-06-07, 09:53
- Intro. and question regarding Osage Orange - John in Balto., 2009-05-29, 10:58
![Open whole thread [*]](templates/default/images/complete_thread.png)
- Intro. and question regarding Osage Orange - lwllms, 2009-05-29, 12:43
- Intro. and question regarding Osage Orange - John in Balto., 2009-05-29, 13:33
- Intro. and question regarding Osage Orange - lwllms, 2009-05-29, 19:52
- Intro. and question regarding Osage Orange - billd, 2009-06-02, 09:23
- Intro. and question regarding Osage Orange - lwllms, 2009-06-06, 07:12
- Intro. and question regarding Osage Orange - billd, 2009-06-02, 09:23
- Intro. and question regarding Osage Orange - lwllms, 2009-05-29, 19:52
- Intro. and question regarding Osage Orange - John in Balto., 2009-05-29, 13:33
- Intro. and question regarding Osage Orange - lwllms, 2009-05-29, 12:43
- help to upload a picture - terry222, 2009-05-26, 13:38
![Open whole thread [*]](templates/default/images/complete_thread.png)
- 07 Plane Iron Metal Type - delsur777, 2009-05-16, 23:56
![Open whole thread [*]](templates/default/images/complete_thread.png)
- 07 Plane Iron Metal Type - lwllms, 2009-05-17, 10:59
- 07 Plane Iron Metal Type - delsur777, 2009-05-17, 12:50
- 07 Plane Iron Metal Type - lwllms, 2009-05-17, 16:41
- 07 Plane Iron Metal Type - delsur777, 2009-05-17, 16:59
- 07 Plane Iron Metal Type - lwllms, 2009-05-17, 19:14
- 07 Plane Iron Metal Type - delsur777, 2009-05-17, 21:19
- 07 Plane Iron Metal Type - lwllms, 2009-05-17, 22:27
- 07 Plane Iron Metal Type - delsur777, 2009-05-17, 23:29
- 07 Plane Iron Metal Type - lwllms, 2009-05-17, 22:27
- 07 Plane Iron Metal Type - delsur777, 2009-05-17, 21:19
- 07 Plane Iron Metal Type - lwllms, 2009-05-17, 19:14
- 07 Plane Iron Metal Type - delsur777, 2009-05-17, 16:59
- 07 Plane Iron Metal Type - lwllms, 2009-05-17, 16:41
- 07 Plane Iron Metal Type - delsur777, 2009-05-17, 12:50
- 07 Plane Iron Metal Type - lwllms, 2009-05-17, 10:59
- How to true a chip breaker - JVHovey, 2009-05-13, 10:00
![Open whole thread [*]](templates/default/images/complete_thread.png)
- Miniature Plane by Les Staniszewski - John Maki, 2009-05-05, 14:31
![Open whole thread [*]](templates/default/images/complete_thread.png)
- pins through the plane - Mungo Park, 2009-04-01, 19:00
![Open whole thread [*]](templates/default/images/complete_thread.png)
- pins through the plane - Mungo Park, 2009-04-04, 08:52
- pins through the plane - Admin, 2009-04-06, 08:32
- pins through the plane - Admin, 2009-04-06, 08:49
- pins through the plane - Mungo Park, 2009-04-13, 15:43
- pins through the plane - Admin, 2009-04-14, 11:44
- pins through the plane - Mungo Park, 2009-04-17, 18:26
- pins through the plane - Admin, 2009-04-14, 11:44
- pins through the plane - Mungo Park, 2009-04-13, 15:43
- Cherry Wood - m. muzzarelli, 2009-03-27, 16:48
![Open whole thread [*]](templates/default/images/complete_thread.png)
- Cherry Wood - Admin, 2009-04-14, 12:04
- cap iron question - spatchcock, 2009-03-22, 13:22
![Open whole thread [*]](templates/default/images/complete_thread.png)
- cap iron question - lwllms, 2009-03-23, 08:24
- cap iron question - spatchcock, 2009-03-23, 10:54
- cap iron question - lwllms, 2009-03-23, 08:24
- Newbie intro - Mungo Park, 2009-03-19, 10:17
![Open whole thread [*]](templates/default/images/complete_thread.png)
- Newbie intro - Admin, 2009-03-19, 19:53
- Newbie intro - Mungo Park, 2009-03-19, 22:25
- Newbie intro - Admin, 2009-03-19, 19:53
- tapered plane iron question - spatchcock, 2009-03-18, 16:08
![Open whole thread [*]](templates/default/images/complete_thread.png)
- tapered plane iron question - lwllms, 2009-03-18, 18:00
- tapered plane iron question - spatchcock, 2009-03-18, 18:09
- tapered plane iron question - lwllms, 2009-03-18, 18:00
- Shoulder Plane Sole - jdunbar.4, 2009-02-23, 07:03
![Open whole thread [*]](templates/default/images/complete_thread.png)
- Shoulder Plane Sole - Admin, 2009-02-23, 16:41
- SAUER & STEINER EBONY A4 AVAILABLE! - SCBSwanson, 2009-02-17, 19:05
![Open whole thread [*]](templates/default/images/complete_thread.png)
- Cleaning up used planes - ray, 2009-01-22, 15:02
![Open whole thread [*]](templates/default/images/complete_thread.png)
- Cleaning up used planes - Admin, 2009-01-28, 16:03
- looking to buy... - bridger, 2009-01-12, 01:46
![Open whole thread [*]](templates/default/images/complete_thread.png)
- looking to buy... - nickurq, 2009-01-23, 13:24
- DADO Plane - TAJones, 2009-01-06, 20:16
![Open whole thread [*]](templates/default/images/complete_thread.png)
- introduction and a plane project - bridger, 2008-10-23, 14:24
![Open whole thread [*]](templates/default/images/complete_thread.png)
- introduction and a plane project - Phil Edwards, 2008-10-24, 12:05
- introduction and a plane project - bridger, 2008-10-24, 15:11
- introduction and a plane project - Phil Edwards, 2008-10-24, 20:33
- introduction and a plane project - bridger, 2008-10-26, 04:08
- introduction and a plane project - bridger, 2008-10-26, 20:45
- introduction and a plane project - bridger, 2008-10-26, 04:08
- introduction and a plane project - Phil Edwards, 2008-10-24, 20:33
- introduction and a plane project - bridger, 2008-10-24, 15:11
- and now for pictures. - bridger, 2008-11-05, 22:42
- and now for pictures. - Phil Edwards, 2008-11-10, 15:20
- introduction and a plane project - Phil Edwards, 2008-10-24, 12:05
- Woden #w4 Plane - cam10, 2008-08-31, 00:37
![Open whole thread [*]](templates/default/images/complete_thread.png)
- Miller rhino Shoulder Plane - jdunbar.4, 2008-08-22, 09:47
![Open whole thread [*]](templates/default/images/complete_thread.png)
- Miller rhino Shoulder Plane - Admin, 2008-08-24, 09:39
- Tapered Irons - Dan Barrett, 2008-07-13, 22:57
![Open whole thread [*]](templates/default/images/complete_thread.png)
- Tapered Irons - nickurq, 2008-10-27, 19:13
- Stanley No. 191 - adjustment screw ? - woodcarver, 2008-06-28, 08:27
![Open whole thread [*]](templates/default/images/complete_thread.png)
- Stanley No. 191 - adjustment screw ? - ChuckH, 2008-07-08, 12:59
- Boxing - Phil Edwards, 2008-06-17, 18:03
- info on J. Kellogg - Dan, 2008-05-18, 23:56
![Open whole thread [*]](templates/default/images/complete_thread.png)
- info on J. Kellogg - billd, 2008-05-19, 10:29
- info on J. Kellogg - Dan, 2008-05-19, 20:49
- info on J. Kellogg - billd, 2008-05-20, 10:11
- info on J. Kellogg - Dan, 2008-05-19, 20:49
- info on J. Kellogg - billd, 2008-05-19, 10:29
- cutting a top escapement - chris anderson, 2008-04-23, 10:30
![Open whole thread [*]](templates/default/images/complete_thread.png)
- cutting a top escapement - lwllms, 2008-04-23, 20:35
- cutting a top escapement - billd, 2008-04-24, 09:22
- cutting a top escapement - chris anderson, 2008-04-24, 22:02
- cutting a top escapement - billd, 2008-04-24, 09:22
- cutting a top escapement - lwllms, 2008-04-23, 20:35
- stamps for marking planes - willarda, 2008-03-20, 12:45
![Open whole thread [*]](templates/default/images/complete_thread.png)
- stamps for marking planes - woodmolds, 2008-03-20, 20:48
- macrome planes - dennis, 2008-03-02, 16:42
![Open whole thread [*]](templates/default/images/complete_thread.png)
- macrome planes - dennis, 2008-03-01, 16:23
![Open whole thread [*]](templates/default/images/complete_thread.png)
- Anant A7 plane - ray, 2008-01-28, 22:04
![Open whole thread [*]](templates/default/images/complete_thread.png)
- stanley #48 T/G hand plane - FRED STEPHEN, 2008-01-11, 21:40
![Open whole thread [*]](templates/default/images/complete_thread.png)
- stanley #48 T/G hand plane - lwllms, 2008-01-12, 19:59
- Measuring molding planes - Sam Yerardi, 2008-01-11, 12:07
![Open whole thread [*]](templates/default/images/complete_thread.png)
- Measuring molding planes - lwllms, 2008-01-11, 17:03
- Measuring molding planes - Sam Yerardi, 2008-01-14, 08:06
- Measuring molding planes - lwllms, 2008-01-11, 17:03