I’ve always found the gentle sweep of a Miller shoulder plane wedge to be one of the most attractive wedges I’ve ever seen. While many of them become “injured” and “deformed” over the years a good quality Miller wedge is always nice to find.

George Miller was almost a relative “latecomer” to the infill plane scene and really only concentrated on one type of infill plane - the shoulder plane. Mind you, what he did he did very well. He is listed as working from 1890 to 1914 at 24 Ampton St, Gray’s Inn Rd in London - quite a considerable period really for a maker of only one style of plane. In most cases that I know of his shoulder planes have been cast from gunmetal, with a thin 1/16″ steel sole “sweated” on with silver solder. The planes I’ve examined from this maker have all been of very high quality and not all of them feature the famous “rhino horn” that Miller is known for. That’s not to say that the shoulder planes without horns started off life this way. Indeed it could be argued that these horns may have become damaged at some stage and were perhaps cut or filed off later on. As there would be absolutely no way to tell for sure that an “unhorned” plane never had a horn in the first place, it’s difficult to say with any certainty that Miller ever made them this way.

While quite a few of the planes that I’ve seen from this maker have been infilled with ebony, this particular George Miller shoulder plane has been infilled with Brazilian rosewood. The 1-1/2″ cutter was bedded at a 20° angle and the gunmetal casting was quite thick and heavy - especially on the base. The rosewood used is quite wild and figured and it would have been interesting to see the rest of the log that this piece had come from.

The mouth is nice and tight - not too easy to achieve with a casting, but made much easier when you can sweat on a steel sole. The chamfering along the top edge is slight with basically just the “sharpness” taken off. As I find with all George Miller shoulder planes the comfort and fit in the hand is superb and it is definitely a style which I like a lot. It is a very heavy hand plane to wield for a long time though so it’s just as well that it’s generally not used for long periods at any one time. Having a heavy mass to it is a rather big bonus when it comes to cleaning up shoulders however!

Although this particular plane is cast in gunmetal, it would be a simple enough project to make a version of it by dovetailing the plates together - or even just riveting the two sides to a center “block” if dovetailing seems too daunting. Whether made in bronze, brass or steel it’s sure to look good, as well as being quite handy around the workshop.

To download the pdf file for this hand plane, click the link below.

George Miller Infill Shoulder Plane Downloads: 842 times

Antique Stanley Bedrock Wood Plane Plus US $55.00 (7 Bids) Auction Ends: Tuesday Jan-06-2009 16:06:57 PST Bid on this Item   | Watch this Item

Stanley Tool Collector News #7 BedRock plane type study US $9.99 (0 Bid) Auction Ends: Tuesday Jan-06-2009 18:02:00 PST Bid on this Item   | Watch this Item

Stanley Bedrock Plane #604 US $35.00 (10 Bids) Auction Ends: Tuesday Jan-06-2009 21:58:55 PST Bid on this Item   | Watch this Item

STANLEY BEDROCK 604 C PLANE US $102.50 (10 Bids) Auction Ends: Wednesday Jan-07-2009 17:28:10 PST Bid on this Item   | Watch this Item

STANLEY 605 C BEDROCK BED ROCK PLANE CORRUGATED Type 3 US $74.99 (0 Bid) Auction Ends: Wednesday Jan-07-2009 17:30:30 PST Bid on this Item   | Watch this Item

Stanley No. 605C Bedrock Plane US $97.88 (4 Bids) Auction Ends: Wednesday Jan-07-2009 18:50:00 PST Bid on this Item   | Watch this Item

Stanley No. 608C Bedrock Flat Top Jointer Plane Antique US $155.00 (10 Bids) Auction Ends: Thursday Jan-08-2009 17:24:00 PST Bid on this Item   | Watch this Item

Stanley Bedrock Lever Cap for #607 bench plane US $9.99 (1 Bid) Auction Ends: Thursday Jan-08-2009 18:00:00 PST Bid on this Item   | Watch this Item

STANLEY BEDROCK #605 HAND PLANE ORIGINAL NICE TYPE 3 US $20.50 (10 Bids) Auction Ends: Thursday Jan-08-2009 18:00:00 PST Bid on this Item   | Watch this Item

Antique Stanley Wood Plane Bedrock No. 607 US $152.50 (13 Bids) Auction Ends: Thursday Jan-08-2009 18:02:00 PST Bid on this Item   | Watch this Item