Plans & Diagrams Archives - Handplane Central

DID YOU KNOW…

Our aim is to make Handplane Central a valuable source of information for all types of handplanes, including wooden planes, infill planes and Stanley type planes.

If you want to make a woodworking plane we have a selection of plans for making planes and we’re adding new articles almost every day. So if you’re into planemaking, aspiring to be a planemaker, a hand plane collector or just want to learn about hand planes in general and how to use them then Handplane Central is a good place to start.

Spiers No. 1 Dovetailed Panel Plane (13-1/2″)

These side plate profile drawings are from a later model Spiers No. 1 dovetailed panel plane and are offered more as a template for cutting out the side plates for dovetailing, rather than a full and comprehensive set of plans or diagrams. Typically the side…

Norris No. A-1 Dovetailed Panel Plane (13-1/2″)

Here are some side plate profile drawings for a later model Norris number A-1 dovetailed infill jointer plane. These diagrams are a little more detailed but are still intended more for use as a template for cutting out the side plates and sole plate prior…

Norris No. 1 Dovetailed Jointing Plane (25-1/2″)

These side plate profile drawings are from a between-the-wars model Norris number 1 dovetailed infill jointer plane and are offered more as a template for cutting out the side plates for dovetailing, rather than a full and comprehensive set of plans or diagrams. The scale…

The Norris Adjuster

It could be argued that the main feature which places Norris infill planes above all the other makers, as far as collectors go, is due to the ingenious, though somewhat flawed, Norris adjuster. While the adjuster feature is a “latecomer” to British infill planes it…

Marples Prefabricated Smoothing Plane

Although in some ways it might be seen as taking a step backwards by using a beech wood body, the Marples “Prefabricated” Smoothing plane is quite a nice little hand plane to have around the workshop. Created in the late 1950’s and possibly to serve…

Miller “Rhino Horn” Gunmetal Infill Shoulder Plane

I’ve always found the gentle sweep of a Miller shoulder plane wedge to be one of the most attractive wedges I’ve ever seen. While many of them become “injured” and “deformed” over the years a good quality Miller wedge is always nice to find. George…

Badger Cast Bronze Bullnose Plane

Charles Badger was a London-based tool maker and dealer who is noted in W. L. Goodman’s “British Planemakers From 1700” as being in business from 1852 (as Badger & Galpin) to 1867. Not much else is really known about him, other than the planes bearing…

Spiers Dovetailed Smoothing Plane (Early)

This is an early model Spiers dovetailed infill hand plane, possibly even a custom order. It has the trademark early features – low two-piece front bun and two-piece rear infill, screwed side plates (to fix the infills), tongue and groove joint for the sole plate…

Spiers No. 11 Dovetailed Bullnose Plane

This is a dovetailed version of a Spiers bullnose plane and, therefore, is a bit more scarce than the cast versions. It’s difficult to put an exact date on this plane but it is generally believed that the dovetailed versions came a little after the…

Norris No. 13 Smoothing Plane

I’ve been busy scanning, cleaning up and uploading a whole bunch of stuff in order to kick off a new section on the site which, in particular, may be of interest to makers and would-be makers of infill planes – dovetailed or otherwise. I thought…